Ultre 3000/4000 - User Manual
3-5
Control Panel - 3
■
Cut Button
Depressing the Cut Button will activate the motorized knife
assembly thereby cutting the film. The cutter cannot be activated
while the film is in motion. Following the cut a short film advance
will occur during which time the output cassette cannot be
removed. When the advance is complete the LCD will display
"REMOVE CASSETTE" at which time the output cassette may be
removed without loss of exposed film. No further functions can be
performed at the control panel until the output cassette has been
removed and replaced.
■
Density Button
The Density Button is depressed when there is a need to change
the current density setting. Using the Right or Left Arrow Button,
the density can be increased or decreased while viewing the value
on the LCD (See Chapter 5, "Changing Default Settings", for
changing Density setting).
■
Menu Button
Depressing the Menu Button will bring up the Menu Selection
Display on the LCD which permits the programming and changing
of the machine's default settings. Operating the Horizontal and
Vertical Arrow Buttons, will display the submenus and functions
on the LCD. For each setting that is changed, it is necessary to
depress the Enter Button to save the new value. When
reprogramming is completed, depress the Menu Button to return to
the Machine Status Display.
✂
1.
2.
3.
1.
2.
3.
3000/4000 UM : Chapter 3 (Controls) Page 5 Wednesday, September 4, 1996 8:28 AM
