Ultre 3000/4000 - User Manual
4-5
Loading - 4
5
ATTENTION:
Before proceeding to step 5, insure that the Cassette
Guide Blocks are set for the correct Supply Cassette width. The
Supply Cassette should set snugly against the Cassette Guide
Blocks. Perform step 4 only if the Cassette Guide Blocks require
adjusting.
4. The Supply Cassette is held in place on the Input Cassette Tray by
using the two Cassette Guide Blocks located on the left and right
sides of the tray. Loosen the thumbscrew on each of the blocks and
then move the blocks making sufficient room to accommodate the
Supply Cassette. The Supply Cassette should set snugly against the
Cassette Guide Blocks.
Handle,
Pressure Roller
Guide,
Input Cassette
Lower
MIC Roller
Upper
MIC Roller
3000/4000 UM : Chapter 4 (Loading) Page 5 Wednesday, September 4, 1996 8:28 AM
