3-8
Edition March 1995
3 - Control Panel
■
Alpha Character
The Alpha Character field is located in the upper left corner. In
normal operation this field will be blank but when the machine is
being serviced it may display one of the following letters:
●
S
-
Serial mode active.
●
A -
Artificial start of line enabled.
This mode is used for testing only and should not be seen
in normal operation.
●
J
-
OOMS, JAM, or NOCASS signals disabled
(see Chapter 6,
Messages
).
This mode is used for testing only and should not be seen
in normal operation.
■
Horizontal Resolution
The Horizontal Resolution field, located on the top line, shows the
programmed horizontal resolution in dots per inch (dpi). "H1200",
for example, indicates that the horizontal resolution has been set
for 1200 dpi (See Chapter 5, "Changing Default Settings", for
changing resolution).
3000/4000 UM : Chapter 3 (Controls) Page 8 Wednesday, September 4, 1996 8:28 AM
