ULTRASOURCE Ultravac 500, Руководство пользователя

Страница: 28 / 84

Think UltraSource First . • info@UltraSourceUSA.com • UltraSourceUSA.com
UltraSource LLC • 1414 West 29th Street • Kansas City, MO 64108-3604 • 800.777.5624 • 816.753.2150
4.10
MAINTENANCE MAINTENANCE
Replacing Power Cord
1. Turn the power switch to the “OFF” position and disconnect the power cord from the wall
receptacle.
DANGER
Hazardous voltage.
Disconnect and lockout power before servicing machine or cleaning. Do not remove panels
unless power has been disconnected and locked out at risk of electric shock hazard.
2. Open the machine as described in “Opening Chamber Machine” on page 4.8.
3. Loosen the cord grip nut on the rear of the machine. Remove the cord from the cable
clamps on the bottom of the chamber. Disconnect the cord from the control panel.
4. Route the new power cord through the cord grip on the rear and through the cable
clamps on the bottom of the chamber.
5. Connect the new power cord to the control panel as shown in the table below.
Connect to
Terminal
110 Volt Wire
Color
230 Volt Wire
Color
Terminal 8 Green (Ground) Green/Yellow
Terminal 7 White Brown
Terminal 6 Black Blue
Maintenance Log
A maintenance log is a journal of all maintenance performed. Each entry includes a
date, maintenance performed (details about the type of work done), and technician (who
performed the maintenance). The maintenance log is also a place where a schedule is kept
for further maintenance.
A maintenance log will clearly show oil changes, daily inspections, Teflon
®
tape
replacement, and so on. A master copy has been provided on page 4.11, please create a
copy and store in the back of this owner’s manual.
Service Log
A service log is a journal of all service work performed. Each entry includes a date, service
provided (details about the type of service), and technician (who performed the service).
A service log will clearly show training provided, frequent wear items, and so on. A master
copy has been provided on page 4.12, please create a copy and store in the back of this
owner’s manual.