Ultrak JPD-100, Руководство пользователя

Страница: 53 / 124

LIST VECTORSCANS
518007-1960-G 2-32 KEMU040018
January 2002
2.2.8 VectorScans.
Each SmartScan unit can store up to 10 VectorScans (0-9). Refer to the
SmartScan Operating and Programming Manual for programming
VectorScans. A list of the programmed VectorScans for each SmartScan
unit can be called up for display on a monitor using the controller. The
contents of each VectorScan can be called up for display on a monitor using
the controller. The operator can start any of the programmed VectorScans
on the control camera (or secondary camera, if selected) using the controller.
2.2.8.1 Programming VectorScans in the KD6 Z-Series.
Three VectorScans can be stored in the KD6 Z-Series. Each
VectorScan can be programmed with up to 16 PreShots with a dwell time
(0-30 seconds) between each PreShot. Perform the following procedure
to program and store a VectorScan in a KD6 Z-Series.
Press the OPT key. OPT
Press 4 (PROG) 4
Press 2 (VectorScan) 2
Enter the VectorScan # (1-3) VS#
Press Enter Enter
Enter the 1
st
PreShot # (1-64) PS#