Ultrak JPD-100, Руководство пользователя

Страница: 46 / 124

PROGRAM PRESHOTS
518007-1960-G 2-25 KEMU040018
January 2002
2.2.7 PreShots
Each SmartScan unit can store up to 100 PreShots (00-99) on the receiver
board. A list of the programmed PreShots for each SmartScan unit can be
called up using the controller for display on a monitor. The operator can
program and store PreShots in the primary control camera, or send the
control camera (or secondary camera, if selected) to any of its programmed
PreShots using the controller.
2.2.7.1 Program PreShots
A PreShot is a predefined SmartScan position (including the pan, tilt,
zoom, and focus settings). A PreShot is saved with a number and title.
The operator uses the PreShot number to send the SmartScan unit to
the PreShot. The title of the PreShot is added to the video signal as the
SmartScan unit goes to the PreShot location.
There are two methods for programming PreShots.
Method 1 – “Quick PreShot”
PreShots can be programmed using the JPD-100 Controller. A PreShot
programmed using the JPD-100 Controller is given a number by the
operator and the JPD-100 Controller automatically assigns the title of the
PreShot. The title is “PreShot n”; n is the number given the PreShot.