Ultrak JPD-100, Руководство пользователя

Страница: 32 / 124

OPERATION
518007-1960-G 2-11 KEMU040018
January 2002
2.2 OPERATION
Operation can begin when power is applied to all components in the system.
Upon power-up, the version of the JPD-100 Controller is displayed on the second
line of the LCD display. Camera one is the control camera and monitor one is
the control monitor. All operator control data (pan, tilt, zoom, focus, iris,
PreShots, VectorScans, etc.) is sent to camera one.
Operation can begin when power is applied to all components in the system.
Upon power-up, the following screens are displayed.
Diamond Series
518007-1980
Rev E 3 seconds
CNTL – CAM - 1 MON – 1
OPT>1 >1 to Change Lang
3 seconds
To change the language, see paragraph 2.2.1.
CNTL – CAM - 1 MON – 1
Camera one is the control camera and monitor one is the control monitor. All
operator control data (pan, tilt, zoom, focus, iris, PreShots, VectorScans, etc.) is
sent to camera one. To control another camera, see paragraph 2.2.3.
A secondary control camera/monitor has to be selected by an operator. A video
switcher is usually installed in a system with more than one camera and/or
monitor. If a secondary control camera is selected, all manual control data (pan,
tilt, zoom, focus, and iris), and auxiliary control are sent to the primary control