Ultrak JPD-100, Руководство пользователя

Страница: 107 / 124

518007-1960-G 4-2 KEMU040018
J
anuary
2002
b. Troubleshooting
If problems occur at the initial installation phase, verify that the procedures
in Section 4 have been performed correctly and the connectors are seated
fully into the interconnecting equipment. To verify the large joystick on the
controller is operating correctly, refer to Section 2, paragraph 2.3.12 of this
manual.
Because this unit is just one part of an overall system, it may be necessary
to verify that the other equipment types have been installed and are
operating correctly before assuming the problem exists at the controller
unit. If problems still exist after verifying correct installation and the
problem has been isolated to the controller, then it must be removed for
servicing.
THERE ARE NO USER-SERVICEABLE PARTS COMPRISING
THE SMART HAND CONTROLLER UNIT. REFER SERVICING TO
QUALIFIED PERSONNEL ONLY.
c. Battery Replacement
The JPD-100 unit has a lithium battery located on the control board at
XU4A. The life expectancy of the battery is 10 years. If necessary, replace
the battery with a Dallas #DS1213C. This battery is also available through
Ultrak, part number 840301-0025. Use of another battery may present a
Risk of Fire or Explosion.
CAUTION
Battery May Explode If Mistreated. Do Not
Recharge, Disassemble Or Dispose Of In
Fire.