ultracomfort Power Recline UC551-L Скачать руководство пользователя страница 76

Страница: 76 / 94

Hand Controls -

Lift & Recline and Heat & Massage

*P/N

: HV4101-HC-NQR

P/N

: HV4101-HC (Cut-in: August 8, 2012 s/n UC or PL 1207F2S12160) GHV system

To Operate Lift

Press Up key to raise chair. Press DOWN key to lower

chair.

To Lock/Lift

Press and hold LOCK/UNLOCK key for approximately 3

seconds until red lock icon is lit.

To Unlock Lift

Press and hold LOCK/UNLOCK key for approximately 5

seconds until green unlock icon is lit.

To Operate Heat

Press HEAT key to turn on. Press HEAT key again to turn

off.

To Operate Massage

Press MASSAGE key to turn on massage. Press again to

change from WAVE/STEADY/PULSE modes (colored

LEDs indicate selection).

To Turn Massage Off

Press and hold MASSAGE key.

Massage Intensity

Press INTENSITY key to choose from LO/MED/HI

(colored LEDs indicate

selection).

NOTE:

The heat and massage is controlled by a 20

minute timer.

* Hand Control models currently being used.

Models:

UC340. UC480, PL340, PL470

To Operate Lift

Press Up key to raise chair. Press DOWN key to lower chair.

To Lock/Lift

Press and hold LOCK/UNLOCK key for approximately 3 seconds until red lock icon

is lit.

To Unlock Lift

Press and hold LOCK/UNLOCK key for approximately 5 seconds until green un-

lock icon is lit.

To Operate Heat

Press HEAT key to turn on. Press HEAT key again to turn off.

To Operate Massage

Press MASSAGE key to turn on massage. Press again to change from WAVE/

STEADY/PULSE modes (colored LEDs indicate selection).

To Turn Massage Off

Press and hold MASSAGE key.

Massage Intensity

Press INTENSITY key to choose from LO/MED/HI (colored LEDs indicate

selection).

NOTE:

The heat and massage is controlled by a 20 minute timer.

Models:

UC340, UC480,

PL340

P/N

: HV4001 (GHV system)

Содержание Power Recline UC551-L































































































Результаты поиска

Содержание Power Recline UC551-L

Отзывы:

Похожие инструкции для Power Recline UC551-L

Бренды по названию

Популярные бренды

ultracomfort Power Recline UC551-L, Руководство по обслуживанию

Результаты поиска

Содержание Power Recline UC551-L

Отзывы:

Похожие инструкции для Power Recline UC551-L

Бренды по названию

Популярные бренды