ultracomfort Power Recline UC551-L Скачать руководство пользователя страница 75

Страница: 75 / 94

Hand Control - Heat & Massage Only

P/N

: HV3100-UC (DHV System with 2 zones)

P/N

: HV3000-UC (DHV System with 3 zones)

Hand Controls -

Lift & Recline and Heat & Massage

P/N

: HV4200 (BHV System)

Press PWR to turn On or Off.

15 Minute Timer: Single Press (

GREEN

)

30 Minute Timer: Press & Hold (

ORANGE

)

Press LO or HI to turn HEAT ON or OFF.

Independent 30 Minute Timer.

Press any or all ZONE keys to turn any ZONE On or Off.

Press SELECT, WAVE, or PULSE for desired operating mode.

Press – (Left) to decrease or + (Right) to increase INTENSITY and SPEED.

Models:

All with standard heat & massage.

Input Power:

+27Vdc Switching Power Supply

The power button needs to be turned on to activate all the functions of the hand

control. Activating the hand control starts a 20 minute timer. To restart the timer after

it shuts off, press the PWR button again. Lights will dim to conserve energy after

about 10 seconds of non use.

PWR Button Operation:

Green

= Power on

Blue = Power off

Power Lock Out

To lock the hand control, press and hold PWR button for 4 seconds. The button will

glow red. To unlock the hand control, press and hold PWR button for 4 seconds. The

button will glow blue. After unlocking the hand control, you will need to press the

PWR button to turn on the power to the hand control.

MSG Button Operation:

Press to turn on the vibrators.

Press again to turn off the vibrators.

HEAT Button Operation:

Press to turn on the heating pad.

Press again to turn off the heating pad.

Arrow Key Operation:

Arrow Up

(S1) = Recline Position

Arrow Down

(S2) = Seated Position

Timer Functions:

There are two separate timer functions, One for Heat, and the

other for Massage functions.

Heat Timer

– Heat timer is activated when the heat button is depressed. Timer is

factory set for 20 minutes.

Massage Timer

- Massage timer is activated when the PWR button is depressed.

Timer is factory set for 20 minutes.

Models:

PL340, UC480,

UC522, UC524

Содержание Power Recline UC551-L































































































Результаты поиска

Содержание Power Recline UC551-L

Отзывы:

Похожие инструкции для Power Recline UC551-L

Бренды по названию

Популярные бренды

ultracomfort Power Recline UC551-L, Руководство по обслуживанию

Результаты поиска

Содержание Power Recline UC551-L

Отзывы:

Похожие инструкции для Power Recline UC551-L

Бренды по названию

Популярные бренды