ultracomfort Power Recline UC551-L, Руководство по обслуживанию

Страница: 16 / 94

16
20. Place the lift frame onto the chair shell.
21. Use the hitch pin(s), clevis pin(s), and washers to fasten the recline strap(s) to the lift frame.
22. Use the four (4) T30 lag screws, eight (8) on models (501M26, 501L26, 501T28, 550-M26) to
fasten the lift frame to the arm assembly.
23. Reinstall the hand control wire clamp.
24. Plug the transformer back into the wall outlet and test.
Recline Straps
Tools needed: Needle nose pliers, zip ties, and a chair stand.
1. Unplug the transformer from the wall outlet.
2. Gently push the chair over onto the footrest, turn it upside down or, gently push it over onto its
side, opposite of the hand control.
3. Remove the hitch pin(s), clevis pin(s), and washers that fasten the top of the motor(s) to the
recline straps.
4. Remove the hitch pin(s), clevis pin(s), and washers that fasten the recline straps to the lift frame.
5. Remove the hitch pin(s), clevis pin(s), and washers that fasten the recline straps to the recline
bar.
6. Use the hitch pin(s), clevis pin(s), and washers to
fasten the new recline straps to the recline bar.
7. Use the hitch pin(s), clevis pin(s), and washers to
fasten the new recline straps to the lift frame.
8. Use hitch pin(s), clevis pin(s), washers, and
spacers to fasten the top of the motor to the
new recline straps.
9. Turn the chair over onto the lift frame.
10. Plug the transformer into the wall outlet and test.
11. Reinstall the seatback (if removed).
Recline Strap(s)
Recline Bar
Hitch
Pin(s)
Lift Frame