ultracomfort Power Recline UC551-L Скачать руководство пользователя страница 17

Страница: 17 / 94

Fork Head Replacement

Part Number:

GMOKI-13

Tools needed:

Needle nose pliers, vise-grips, screwdriver, and a cloth.

This is the fork head.

The fork head is screwed into the push tube of the motor.

If you've ever heard the saying

for removing and tightening bolts, now think the opposite.

The fork head is screwed into the push tube lefty-tighty/

righty-loosey,

but

the push tube is also screwed into the

motor lefty-tighty/righty-loosey.

Once the motor is removed from the chair, the push tube

can be spun in the clockwise direction until it comes com-

pletely out of the motor as shown.

If you completely remove the push tube, to properly line it

back up for the installation in the chair, tighten the push

tube all the way in, then back it off 2 full turns and then just

enough to get it attached to the motor straps with the clevis

pin.

To change just the fork head you want to grab hold of the

push tube with a pair of vise-grips.

Use a cloth to protect

the tube

to prevent the whole tube from spinning when you

try to loosen the fork head.

To loosen, turn the plastic fork head clockwise.

If enough of the broken fork tube is still there you can put a

large screwdriver through the holes to get leverage to spin

it off. If not you'll need another pair of vise-grips or pliers to

break it loose.

Again...lefty-tighty/righty-loosey.

Содержание Power Recline UC551-L































































































Результаты поиска

Содержание Power Recline UC551-L

Отзывы:

Похожие инструкции для Power Recline UC551-L

Бренды по названию

Популярные бренды

ultracomfort Power Recline UC551-L, Руководство по обслуживанию

Результаты поиска

Содержание Power Recline UC551-L

Отзывы:

Похожие инструкции для Power Recline UC551-L

Бренды по названию

Популярные бренды