www.ultraoptics.com
page 9
and be separated from the tray. If the bar code is facing the wrong direction, the system will not
be able to properly process the work.
The conveyor on the front of the 44R will pull trays into the machine as space permits. The
system controller will monitor the presence of trays and allow them to move forward by
actuating stop pins located on the bottom of the conveyor.
Loading Re-Work
If the need arises to coat just one lens out of a pair on a particular job, simply place the lens that
does not need to be coated onto the opposite side of the tray and keep the lens that does need
to be coated in one of the standard locations on the tray as shown in the following picture. This
allows the processing of a single lens from a pair, without the two lenses being physically
separated and risk of misplacement.
