www.ultraoptics.com
page 7
6. Touch Auto Cycle to ON.
7. Begin feeding trays to the system.
Communication With Lab Management System
The 44R is designed to integrate into the lens manufacturing system by communicating with the
Lab Management System (LMS). Each job tray will have a work ticket containing a barcode.
As the tray enters the 44R, the barcode on the ticket will be scanned. Once the bar code is
scanned, the 44R controller will communicate with the LMS software to determine how the job
should be processed. After passing the job identification number to the LMS, a code which
resides in the CPID field will be returned to the 44R. This code will then determine if the 44R
should simply wash and dry the lens, or if it should also apply and cure the back-side hard coat.
The 44R communicates with the LMS via an Ethernet cable. It is suggested to use a cat6 cable.
The cable should connect to the connector on the back of the machine, as shown in the picture
below:
