Ultimaker S7, Инструкция по установке и эксплуатации

Страница: 18 / 38

EN UltiMaker S7 Installation and user manual 17
Material Station
If the UltiMaker S7 is used in combination with a Material Station, loading materials is quick and simple, and
can be done from the front. The materials will be pre-loaded into the Material Station and will be automatically
forwarded to the print head when a print is started.
1. Unpack the material and cut off the end, ensuring a short, sharp tip.
2. Open the Material Station door.
3. Place the spool of filament into one of the material bays of the Material Station with the NFC
tag on the left side.
4. Insert the tip of the material into filament entry port 1 until the prefeeder grabs the material
5. Wait for the Material Station to detect the material and select Confirm to continue.
When using a third-party material, you can manually select the material type.
6. Repeat the steps above for UltiMaker PVA Natural, but insert it into filament entry port 2.
You can load more materials in the Material Station at this point or do so later at any time.
Network installation
The UltiMaker S7 can connect to a local area network, using either Wi-Fi or Ethernet. To connect to a network, select
Network setup from the welcome setup list. If you want to set up a wireless network connection, select Wi-Fi setup . If
you want to use Ethernet, or don’t want to set up network connectivity, select Skip .
Set up Wi-Fi
To connect your UltiMaker S7 to a wireless network, you will need a computer or a smartphone. Start the Wi-Fi
setup and follow the steps on the touchscreen:
1. Wait until your printer has created a Wi-Fi hotspot. This may take a minute.
2. Use a computer or smartphone to connect to the printer. The name of the Wi-Fi network is shown on the
touchscreen of the printer.
3. A pop-up will appear on the display of your computer or smartphone. Follow the steps to connect the printer to
your local Wi-Fi network. The pop-up will disappear when you have completed these steps.
If the pop-up does not appear, open a browser and go to a website that is not yet known by your browser.
Within some network environments the UltiMaker S7 may experience difficulties connecting wirelessly. When
this happens, repeat the Wi-Fi setup from another computer or smartphone.
4. Go back to the UltiMaker printer and wait until the Wi-Fi setup is finished.
If you skip the Wi-Fi setup during the welcome setup, you can start it again from the Preferences menu, by
selection the Network option.