Ultimaker 3 Extended, Инструкция по эксплуатации

Страница: 9 / 21

3D PRINT - Ultimaker Extended 3 CHAPTER 2. MATERIAL
.
1 : Spool material 1 - 2 : Spool material 2 - 3 : Spool holder.
•
Select the ”confirm” option on the display panel when you have removed
the material spool from the spool holder.
.
1 : Confirm button
2.2 Load/Change the material
•
First, choose your material spool (PLA, ABS, PLA...) on the shelf above
the 3D print.
See below, the combinations if you wish use the two materials.
.
Open the print head fan bracket and make sure type of the print cores is com-
patible with the material that you want use.
1 .
Begin to put the material 2 on the spool holder. If you need to change the print
core, see the Ultimaker print core manual.
8