Ultimaker 3 Extended, Инструкция по эксплуатации

Страница: 10 / 21

3D PRINT - Ultimaker Extended 3 CHAPTER 2. MATERIAL
2.2.1 Material 2
•
Go to the menu ”MATERIAL/PRINTCORE” by rotating and then push-
ing the button 1 at the front side of the 3D print.
1 : Rotate button to select the menu - 2 : Push button to confirm
•
Select the ”Material 2” and then ”Change”. Select ”Load” when the spool
material is not installed before.
1 : Menu - 2 : Load option - 2 : Change option.
The print core 2 BB 0,4mm is only for PVA material.
• Place the spool material 2 on the spool holder.
9