Ultimaker 3 Extended, Инструкция по эксплуатации

Страница: 20 / 21

3D PRINT - Ultimaker Extended 3 CHAPTER 4. START PRINTING
•
Select the right print core for each material.
1 : Print core 1 - 2 : Print core 2 - 3 : Print core selection - 4 : Material
selection - 5 : Profile settings - 6 : Infill density - 7 : Generte support - 8 :
Plateform adhesion - 9 : Custom setting - 10 : Save model.
•
Connect the print to network by selecting the ”connect” button 1 in the
print monitor bar.
•
Select the ”refresh” button 2 : .
• Select the ”astou print” in the printer list and then close the window.
19