Ultimaker 3 Extended, Инструкция по эксплуатации

Страница: 16 / 21

3D PRINT - Ultimaker Extended 3 CHAPTER 2. MATERIAL
.
• Insert and push the end of the material 1 into the feeder 1. Push the feeder
knob through up 2 and at the same time, pull the material 1 .
.
1 : Feeder - 2 : Feeder knob.
•
Confirm by pushing the button at the front side of the print when you have
inserted the materiel.
.
•
When using Ultimaker material , Wait until the Ultimaker print detects the
material and then select ”confirm”.
.
•
When using non-Ultimaker material , material is not automatically de-
tected. Rotate the button to select the material ”select Material” on the
droplist. Confirm by pushing the button.
15