Ultimaker 3 Extended, Инструкция по эксплуатации

Страница: 14 / 21

3D PRINT - Ultimaker Extended 3 CHAPTER 2. MATERIAL
1 : Rotate button to select the menu - 2 : Push button to confirm
•
Select the ”Material 1” and then ”Change”. Select ”Load” when the spool
materials is not installed before.
1 : Menu - 2 : Load option - 2 : Change option.
•
Remove the spool guide holder from spool holder towards you.
1 : Spool holder- 2 : Spool guide holder
•
Place the material spool on the guide holder. Make sure that the spool
material in counter-clockwise direction.
13