Ultimaker 3 Extended, Инструкция по эксплуатации

Страница: 8 / 21

3D PRINT - Ultimaker Extended 3 CHAPTER 2. MATERIAL
.
If you cannot remove the material from the feeder 1 . Push the feeder knob
though up 2 and at the same time, pull the material 3 .
.
• Remove the material from the spool holder 1 .
* For Spool 1 :
Pull the spool holder 2
.
1 : spool material 1 - 2 : spool holder
* For Spool 2 :
Pull the spool holder 1 and then slide the spool material 2 .
7