Ulma MK Structure Скачать руководство пользователя страница 29

Страница: 29 / 63

Construcción

MK STRUCTURE

STRUCTURE

Solutions

High load-bearing capacity structures up to 360 kN

are obtained with triangular structures. These

structures are mainly used for solutions such as

gantry shoring systems, trusses, deck flange and cut-

and-cover tunnel form carriers.

These structures are characterised by using walers for

all diagonal and horizontal connections in direction

of the main axis, and by using such nodes that allow

of connecting one, two, three or more walers at 60º.

Those can be alternated at determined points of the

structure with nodes allowing of waler connections

at 90º and 45º.

All high load-bearing capacity joints are fastened

with 6 bolts M16 quality 8.8 and their corresponding

nuts providing a maximum tensile or compression

load of 360 kN to the node.

The triangular structures are formed with the same

waler size, the load-bearing capacity increasing

proportionally to the waler length. However, there is

another limitation to the structure at buckling in the

direction of the weak or secondary axis.

The waler providing the best structure weight–

working load ratio is the Waler MK-120 / 2.625

enabling a distance between nodes of 3 m.

Usually the structure is assembled at once, although

it might be useful to divide the assembly in modules

in order to ease future operations such as the placing

of the structure into its final position.

Medium load-bearing capacity structures up to 150

kN are characterised by using more frequently

tubular elements for the diagonal and horizontal

connections, reserving the walers for the most

demanding parts of the structure. These structures

are mainly used for solutions such as vertical

formwork carriers or parapet form carriers.

Medium load-bearing capacity joints are fastened

with pins D20 providing a maximum tensile or

compression load of 75 kN to the diagonals and 360

kN to the walers. Moreover, there is the load

limitation of the tube used for the diagonals and

horizontal braces.

Содержание MK Structure
































































Результаты поиска

Содержание MK Structure

Отзывы:

Ulma MK Structure, Руководство пользователя, Страница: 29 / 63

Результаты поиска

Содержание MK Structure

Отзывы: