Ulma MK Structure Скачать руководство пользователя страница 19

Страница: 19 / 63

Construcción

MK STRUCTURE

STRUCTURE

The D20 holes are mainly used for the connection of

secondary components, i.e., bracing items.

2.2.7.

NODE 90 MK

These nodes enable to connect up to 2 walers at 90º.

The connections are fastened with 6 bolts M16

inserted into the D17 holes.

The D20 holes are mainly used for the connection of

secondary components, i.e., bracing items.

2.2.8.

NODE 60 SUPPORT MK

The Node 60 Support MK is a kind of foot to support

the structure on something, mainly on profiles. It

works as support of a bi-supported truss.

It enables to connect up to 2 walers at 60º as the

Node 60 MK does. The connections are fastened with

6 bolts M16 inserted into the D17 holes.

The support plate provides D25 (25 mm diameter)

and D22 holes to connect other items and

accessories.

2.2.9.

ORTHOGONAL JOINT MK

The Orthogonal Joint MK connects up to 3 walers

perpendicular to each other. The connection with the

waler is fastened with 4 bolts M16 inserted into the

D17 holes.

It can also connect 2 walers lengthwise. In this case,

each waler is fastened with 6 bolts M16 inserted into

the D17 holes .

This connector has medium load-bearing capacity

and is mainly used in light form carriers.

2.2.10.

AXIAL NODE M D20 MK

This node enables to connect one waler to another in

a hinged way, always in the main plane. The waler

and the node are fastened with 2 bolts M16 inserted

into the D17 holes. Unlike the Axial Node M D40,

this one does not have high load-bearing capacity.

The hinged connection between the waler and the

node is fastened with pins E20x70.

Содержание MK Structure
































































Результаты поиска

Содержание MK Structure

Отзывы:

Похожие инструкции для MK Structure

Бренды по названию

Популярные бренды

Ulma MK Structure, Руководство пользователя

Результаты поиска

Содержание MK Structure

Отзывы:

Похожие инструкции для MK Structure

Бренды по названию

Популярные бренды