Construcción
Construcción
Construcción
Construcción
24
MK
MK
MK
MK STRUCTURE
STRUCTURE
STRUCTURE
STRUCTURE
2.2.27.
END JOINT 74 MK AND END JOINT MK
Both items are used to connect the structures to the
bogies.
The End Joint 74 MK is applied directly on the
structure when the structure itself is high enough to
match/obtain? the height of the form carrier?. One
end is connected to the walers with 6 bolts M16, the
other to the bogie with 4 bolts M24.
The End Joint MK is used to form vertical structures
or towers modules, that is, what the previous head
joint makes at 74º, the Head Joint MK makes at 90º.
2.2.28.
NODE END-PLATE JOINT MK and WALER
END-PLATE JOINT MK
The Node End-Plate Joint MK enables an end joint of
structures whenever a hinged support on the same is
required. It is connected directly onto the MK Shoring
Towers or to the bogie.
Likewise, the Waler End-Plate Joint MK enables an
end joint of structures on the walers of the structure.
It is connected directly onto the MK Shoring Towers
or to the bogie.
One end is fastened to the structure with pin D40 in
the case of the node end-plate and with 6 bolts M16
in the case of the waler end-plate. The other end is
fastened to the shoring towers with 4 bolts M24 or
to the main beams with Clamps 16/70.
2.2.29.
HANDRAIL HEAD MK
The handrail head serves to place tubes D48 to create
a handrail system at any height of the waler. It is
fastened with 2 bolts M16.