Ulma MK Structure Скачать руководство пользователя страница 22

Страница: 22 / 63

Construcción

MK STRUCTURE

STRUCTURE

2.2.18.

WALER - WALER 90º JOINT MK AND

NODE - WALER 90º JOINT MK

The Waler - Waler 90º Joint enables to connect 2

walers perpendicular to each other, in the secondary

axis.

The Node -Waler 90º Joint enables to connect a

waler perpendicular to a node, in the secondary axis.

It complements the previous one.

Both are mainly used for applications where a

structure is required to be connected perpendicularly

to an already existing structure. They do not work at

tension hence such loads must be avoided when

using these items.

2.2.19.

PIN E20x70

This item is used to fasten all connections between

walers, nodes, joints, push-pull props E, horizontal

braces or diagonals, respectively, where these are

required to be hinged. Each pin E20x70 is secured

with a Cotter pin R/5.

2.2.20.

JACK 360 MK

The jacks are the elements which allow of the vertical

adjustment, that is, the levelling of the form carrier.

They are placed at the base of the carrier bogies. The

Jack 360 MK is used to adjust heavy-duty form

carriers. It has an adjustment range of 220 mm and a

working load capacity up to 360 kN. It is fastened to

the jack waler with 4 bolts M24.

2.2.21.

JACK 150 MK

The Jack 150 MK is used to level medium load-

bearing capacity form carriers. It has an adjustment

range of 220 mm and a working load capacity up to

150 kN. It is fastened to any END PLATE of the MK

Shoring System with 4 bolts M24.

2.2.22.

JACK 60 MK

The Jack 60 kN is used to level low load-bearing

capacity form carriers. It has an adjustment range of

220 mm and a working load capacity up to 60 kN. It

is fastened to the walers with 4 bolts M16.

All jacks must be lubricated before use.

Содержание MK Structure
































































Результаты поиска

Содержание MK Structure

Отзывы:

Ulma MK Structure, Руководство пользователя, Страница: 22 / 63

Результаты поиска

Содержание MK Structure

Отзывы: