------------------------------------------------------------------------------------------------------------------------
ULB PROPRIETARY RIGHTS NOTICE
- This document contains the confidential and proprietary information of ULB. You may not
possess, use, copy or disclose this document or any information in it for any purpose without express written permission. Neither receipt
from any source, nor possession of this document, constitutes such permission. Possession, use, copying or disclosure by anyone
without express written permission of ULB is not authorized and may result in criminal and/or civil liability.
C:\Users\Service-Eng\Desktop\Mx\Manuals\ULB-R110 MANUAL_rev02.docx Page
30
of
42
Data Logging
1) Insert USB stick in USB port on the back of HMI display.
2) Click <DATA LOGGING> button, will show following screen(see figure-16)
Figure-16 Data Logging
1) Click <START LOGGING> will start recording Set KW and ACT KW values for
each load bank at every 10 seconds. All values are stored in ‘csv’ format file
having following naming convention,
MultiLoad_MMDDYY_HHMMSS.csv e.g MultiLoad_052618_150159.csv
2) Click <START LOGGING> will also start recording following values of load bank
in which USB stick is inserted at every 10 seconds.
Total KW, Average Voltage, Average Current, Frequency, Phase wise KW, Line
Voltage, Line current
All values are stored in ‘csv’ format file having following naming convention,
R110KW_MMDDYY_HHMMSS.csv e.g R110KW_052618_150159.csv
Note: When multiple load banks are operated, files at option 1 & 2 will created, however
during single load bank operation only one file at option 2 above will be created.
Click <CLOSE> to close above dialog box.
