GENERAL GUIDELINES
Use bottled water only
Filling the dispenser with any other type of
liquid(s) may cause significant problems and
will void the limited warranty.
Disconnect the power cord from the outlet
before cleaning, inspecting, or repairing the
dispenser to prevent electrical shock.
Keep dispenser clean
The cooling performance and energy efficiency
decrease when dirt and/or dust accumulate on
the condenser. Clean the condenser (accessible
from back) monthly with a damp cloth.
Power interruption
When the power cord is disconnected, wait a
minimum of 5 minutes before reconnecting.
When power is temporarily turned off,
disconnect the cord from the electric outlet
and wait a minimum of 5 minutes before power
is reconnected after the power is restored.
4
PLACEMENT OF YOUR NEW DISPENSER
Must be indoors
Placement location should
be away from direct sunlight
and excessive heat, cold
and moisture.
Place dispenser in a well
ventilated area
Allow a minimum of 4 inches
from the wall for proper
function of the condenser
coil located on the back of
the dispenser.
Place dispenser on a flat and
stable surface.
Unbalanced placement may
cause excessive noise and/or
shaking of the unit.
Connect dispenser’s electric
cord directly into a three-prong outlet.
Do not use with an extension cord.