UINICS SP-564A Series, Инструкция по эксплуатации

Страница: 20 / 37

- 19 -
Mode No. Totalizer : Decimal point, Counting method, Reset, Converter
Ａ Ｂ Ｃ Ｄ Ｅ Ｆ
０ ８．３ ０ ０ ０
Display decimal point setting
0･･･ 0
1･･･ 0.0
2･･･ 0.00
3･･･ 0.000
4･･･ 0.0000
Counting method
0･･･ additional count
1･･･ subtraction count
Reset key time
0･･･ reset after 2-seconds
1･･･ real time reset
EXP-value
0-9
０ ８
Reset time：The setting for the front panel Reset key is specified.
０：The Reset key is pressed for 2 seconds or longer for the count to be reset.
１：The count is reset immediately when the Reset key is pressed.
１：Reset input from the terminal board resets immediately,
overriding this setting.
２：The reset function resets the totalizer and the alarm output.
３：The rate meter reading can not be reset.
This mode “02" -C is EXP-value input as explained in mode “07".