UINICS LV1000 Series, Инструкция по эксплуатации

Страница: 35 / 67

- 31 -
３．When a setting change is made while the external input terminal has been
ON since an external input terminal is recognized with on-edge,
please turn ON an external input terminal again.
［ 0 point adjustment ］
It selects whether to make the 0 poit adjustment effective (the effection that works
by holding + by two seconds) when the measurement is displayed or to
invalidate it.
０：0 point adjustment invalidity・Clearness
The deflection data is made”0”,and 0 adjustment function is stopped.
１：0 poit adjustment is effective
0 adjustment function operates.（The deflection data is memorized.）
２：0 point adjustment invalidity
The deflection data is maintained. When the ＋ is pushed for 2 sec,
the function to adjust the display to 0 is stopped.
Mode No. Preset output ：Common setting（１）
４
Ａ Ｂ Ｃ Ｄ Ｅ
４．０ ０．０
Preset output state distinction time.(OUT1 to 4)
００．１～９９．９ sec
（００．０ is functional stop）
［ Preset output state distinction time ］
After going into a power range exceeding a preset value（Boundary value）,when it
continues within a set peried and is in a power range, it outputs.
In additi, if it outside a power range within a set period, preset output state
distinction time will be canceled.
【Preset output state distinction time setting example】 Fig. 19
Preset output state distinction time：5.0 sec