UINICS LV1000 Series, Инструкция по эксплуатации

Страница: 54 / 67

- 50 -
Ａ Ｂ Ｃ Ｄ Ｅ
ｂ．４ ５ ６ ７
１ ２ ３ ４(bit-data）
○ ○ ○ ○
Hold ％
○ ○
When pushed, it becomes the analog minimum input value
adjustment.
The input value (bit-data) inputted now is displayed.
Ａ Ｂ Ｃ Ｄ Ｅ
ｂ．
４ ５ ６ ７
During registration, it
blinks 3 times.
１ ２ ３ ４
○ ○ ○ ○
Hold ％
○ ○
If a is pressed inputting the maximum of the
registered input range, the input value (bit-data) in the
time will be registered as a maximum input.
As a signal registration, bit-data blink 3 times in about
1 sec.
＜Caution＞
Key operation cannot be carried out during bit-data
registration.
Ａ Ｂ Ｃ Ｄ Ｅ
ｂ．４ ５ ６ ７ ．
Lighting
１ ２ ３ ４
○ ○ ○ ○
Hold ％
○ ○
When registered bit-data is checked,
It displays, while pressing the .
※When displaying bit-data registered,
The decimal point of a least significant digit lights up.
In the case of A2 (4 to 20mA) input In the case of A3 (1 to 5V) input
Adjustment item Current value Adjustment item Voltage value
Minimum adjustment 4.000mA Minimum adjustment 1.000V
Maximum adjustment 20.000mA Maximum adjustment 5.000V
In the case of A4 (0 to 5V) input In the case of A5 (0 to 10V) input
Adjustment item Voltage value Adjustment item Voltage value
Minimum adjustment 0.000V Minimum adjustment 0.000V
Maximum adjustment 5.000V Maximum adjustment 10.000V
Mode
Mode
ENT
ENT
！