UFO Comet Light Source, Руководство пользователя

Страница: 21 / 24

TROUBLESHOOTING
21
UFO LIGHTING
Problem Probable Cause Possible Solu ti on
No control over
dimming and/or
decora ti ve wheel
speed.
Unit is dead – no
light output.
Mains power
indicator on PSU and
LCD display are lit,
fans are running
Unit in 0 ­ 10V control mode but no 0 ­ 10V
control voltage present
Check 0 ­ 10v control voltage at controller and
reinstate
Fault on 0 ­ 1V cabling, reverse polarity or
open circuit
Check 0 ­ 10V cabling and repair/replace
Decora ti ve wheel
twitches
but does not turn
Unit in 0 ­ 10V mode but no 0 ­ 10V control
voltage present.
Check 0 ­ 10v control voltage at controller
and reinstate
TROUBLESHOOTING
-
0-10 V MODELS
TROUBLESHOOTING
-
1-10 V MODELS
Problem Probable Cause Possible Solu ti on
Dim level displayed
at 5%, dimmer
control
has no e ff ect
Current sink dimmer connected wrong
polarity
Check and correct polarity in all remote
dimming connec ti ons
Dim level displayed
at maximum,
dimmer
has no e ff ect
Open circuit on current sink dimmer
connec ti on/cabling
Check dimmer cabling and repair/replace
Incompa ti ble current source dimmer
Disconnect dimmer and check output
with DVM turning dimmer from minimum to
maximum – if there is a varying 0 ­ 10V voltage on
output, change the dimmer for a current sink type
Dim level changes
with remote dimming
but light output
range inaccurate or
reduced
Incompa ti ble current sink dimmer Contact UFO