UFO Comet Light Source, Руководство пользователя

Страница: 16 / 24

OPERATION
COMET USER GUIDE
16
0-10 V OPERATION
All Comet models in the range can be 0-10V (current source) controlled as described in the
Programmable Function Table and as detailed in the following sections
For all 0-10V current source operation modes the luminaire must be set to 0-10V in the Control
Mode sub menu.
Control mode
MENU
>> >> SCROLL UP/DOWN >> ENTER
Control mode
0 ­ 10V
CHAN
No.
FUNCTION
0 ­ 10V
VALUE
DESIRED EFFECT
01 LED Dimming 0V to 10V No light output to full light output
02 Wheel Control 0V Wheel at rest at cutout – full light output
02 Wheel Control
0.02V to
4.9V
Wheel indexing. Each increment moves wheel
around one se tti ng and stops. 0.02 to 4.9V = one
full rota ti on
02 Wheel Control 5V to 7.49V Clockwise rota ti on of wheel from fast to slow
02 Wheel Control 7.5V to 10V An ti­ clockwise rota ti on of wheel from slow to fast
0-10V CHANNELS
NOTE: This is a current source 0-10V control system. For this control mode to work, the Comet
requires a varying control voltage input (between 0 and 10V DC) from a 0-10V controller (source)
to control the dimming or decorative wheel motors, or both if two 0-10V channels are used.
If no 0-10V control voltage is present on the dimming input the LED will not illuminate.
If no 0-10V control voltage is present on the motor input the wheel will not turn but may twitch
slightly.