UFO Comet Light Source, Руководство пользователя

Страница: 14 / 24

OPERATION
COMET USER GUIDE
14
DMX OPERATION
With the luminaire in DMX Control Mode all Comet models in the range can be DMX controlled
as detailed in the Programmable Function Table and in the following sections. There are two
DMX control methods available:
• DMX controller or control system
• Comet Master/Slave configuration
For all normal DMX operation modes, the DMX address must be set using the DMX Address
menu and the luminaire must be set to DMX in the Control Mode sub menu as shown below.
DMX CONTROLLER/CONTROL SYSTEM
Control mode
MENU >>
>> SCROLL UP/DOWN
DMX
>> ENTER
DMX ADDRESSING
Select program
MENU
>> >> SCROLL UP/DOWN TO SELECT ADDRESS >> ENTER
The Comet occupies 3 DMX channels as detailed below. When addressing multiple Comets:
• If they are to function together on the same DMX channels use the same address for all
• If they are to function independently always leave 3 channels free i.e. address 001, 005, 009 etc.
CHAN
No.
FUNCTION
ADDRESS
VALUE
DESIRED EFFECT
01 LED Dimming 0 ­ 255 0 ­ 100% Dimming across range
02 Wheel Indexing 0 ­ 127
Each increment moves wheel one se tti ng and
stops. 0 ­ 127 = one full rota ti on
02
CW rota ti on of wheel from
fast to slow
128 ­ 189 Fast to slow clockwise
02 No rota ti on of wheel 190 ­ 193 Wheel sta ti onary
02
ACW rota ti on of wheel
from slow to fast
194 ­ 255 Slow to fast an ti­ clockwise
03 Normal ­ LED & Fan On 0 ­ 119 LED illuminated & fan running
03 Wheel to home posi ti on 120 ­ 127 Wheel returns to home posi ti on
03 Ini ti alise / Reset 128 ­ 200 Ini ti alise & reset If held for 10 seconds
03 LED & Fan O ff 201 ­ 255 LED & fan o ff a ft er 30 second delay
DMX CHANNELS