UFO Comet Light Source, Руководство пользователя

Страница: 13 / 24

OPERATION
13
UFO LIGHTING
MANUAL OPERATION
All Comet models in the range can be manually controlled in a variety of ways as detailed in the
Programmable Function Table above and in the preceding section and in the following
sections.
NOTE
• For all manual operation modes, the luminaire must be programmed to Master
• Refer to Programmable Function Table above for Main Menu and Sub Menu availability for
each model
Control mode
MENU
>> >> SCROLL UP/DOWN
Master
>> ENTER
With the luminaire in Master Control Mode the luminaire light output can be controlled by the
Dim level menu from 0% (no light output) to 100% (maximum light output) as detailed below
MANUAL DIMMING
Dim level
MENU >>
>> SCROLL UP/DOWN TO SELECT LEVEL >> ENTER
With the luminaire in Master Control Mode the wheel speed can be controlled by the wheel
menu from Stop to 47rpm as detailed below (all speeds approximate)
MANUAL WHEEL CONTROL
Wheel speed
Stop
MENU
>> >> SCROLL UP/DOWN AND PRESS ENTER
TO SELECT COLOUR
/
SEQUENCE
Program: Stop Spd1 Spd2 Spd3 Spd4 Spd5 Spd6 Spd7 Spd8 Spd9 Spd10
Speed: ­ 6rpm 12rpm 20rpm 37rpm 47rpm 47rpm 37rpm 20rpm 12rpm 6rpm
Direc ti on: ­ CW CW CW CW CW ACW ACW ACW ACW ACW