UFO Apollo, Руководство пользователя, Страница: 6 / 28

ASSEMBLY & INSTALLATION
APOLLO USER GUIDE
6
ADDITIONAL ASSEMBLY FOR LONGER CUSTOM LENGTHS
*
1. Remove the non-cable end of the Gantry.
2. Slide the Gantry middle-support(s) onto the Gantry.
3. Position the support(s) equidistantly on the Gantry body, following the design drawing
supplied by UFO. Ensure that there is never more than 1147mm of Gantry span unsupported
(extra supports advisable for unsupported spans of 900mm).
4. Use 2x M3x3mm grub screws to fix each middle support to the Apollo body, once correctly
positioned. Do not overtighten. Some further adjustment may be required when Gantry is fitted
in its final position to ensure all legs are straight and not mechanically stressed.
5. Push top of middle leg into middle support and use 3x M2x2mm grub screws to secure leg.
Do not overtighten.
6. Insert bottom of middle leg into foot and once correctly positioned, use 3x M2x2mm grub
screws to fix each middle support to the foot. Do not overtighten. Loosen grub screws from
steps above and re-adjust positions of the various components if required to ensure all legs are
straight and not mechanically stressed, then retighten all grub screws.
An example of an assembled custom Gantry is shown below.
IMPORTANT SAFETY INFORMATION
Failure to provide correct support for the Gantry may cause the Gantry to bend/break, possibly
leading to structural and functional failure, with the possibility of damaging adjacent items.
* Not applicable to Plug & play Gantries, which will be supplied fully assembled as the legs are
not removable.