UFO Apollo, Руководство пользователя, Страница: 5 / 28

Standard Gantry legs are detached for shipping, so will require to be refitted.
Plug & Play Gantries will be supplied fully assembled as the legs are not removable.
OUTPUT CAPACITY
3
UFO LIGHTING
ASSEMBLY & INSTALLATION
5
STANDARD GANTRY SYSTEM ASSEMBLY
1. Very carefully (the component parts, cables etc are
easily damaged), feed the Apollo cable through the top of
one of the legs as shown. The top of the leg is the end
with the notch and cut-out slot.
2. With the cut-out slot facing
towards the Apollo’s main body
(see ‘a’ in image), slowly push the
leg into the gantry corner, while
gently feeding the cable through
the leg as you do so (see ‘b’ in
image). Ensure the cable does not
get snagged, which will prevent
the leg inserting fully and could
cause damage
3. Once the leg is fully inserted,
secure using an M3x3mm grub
screw – supplied, inserted into the
end of the gantry corner (see ‘c’ in
image). Tighten fully, but do not
overtighten.
4. Procedure for assembly of a
non-cable end is essentially the
same, except made simpler by the absence of the cable –
again ensure that the cut-out on the leg faces towards
gantry body.