UDEVAC-500
36
34
610.592A
Rev.
1
Click on the SF-500 Control menu:
On the left it shows that there are six groups in SF-500.
The right shows that there are six groups of zones in the system.
The red LED on the right side indicates that the system is working in emergency mode.
The yellow "FAULT" LED indicates when a system failure occurs.
The LEDs of the EVAC and ALERT buttons, off, indicate that the messages are correct on the card.
SD. They are activated when any of these emergency messages are launched.
Description:
On the left side of the panel SLA-500M or the SLA-500S panel line output control knob, SF- 500 just shows
current effective line output
SF-500 system group can be set from 0 ~ 120, by "
system configuration
" - "
Equipment parameter
" to
confirm the group number (the default is six), each zone in the group can be set by "
Group
"
Put the mouse in the empty place in the grouping list and double click or press "ALL ZONES" to show the status
of the zones.
Click the items in the group list to check which zones include the Group, such as clicking Group Six.
