UDEVAC-500
36
26
610.592A
Rev.
1
"CONTROL"
with this button we open the equipment control window, we
can see the output status of the system zones, the "Reset", "Evac",
"Alert" buttons and the input line buttons.
"STATE"
is used to check the connection status of all equipment
connected to the SLA-500M control unit.
"SYSTEM CONFIGURATION"
to check or modify the operating
parameters of the equipment.
"Equipment parameter"
to configure the control equipment and the
equipment connected to it (microphone desks, slave amplifiers, etc).
"Fire mode"
to configure the parameters of the actions and events that the
control equipment must take in the event of an evacuation or alert message
being activated.
"Group"
to configure the parameters of the groups of zones, allows us to
create groups of speaker zones according to the number of expansion units
that we have configured.
"LOG"
to check the events that have occurred in the equipment such as
alarms, module failures, impedance changes, etc.
"Audio priority & Line audio mode"
to configure the parameters of the
priorities of the different audio signal inputs, such as microphone desks,
evacuation messages, music inputs, etc.
"OTHER"
to check or modify the user and password for access.
"User and password"
to check or modify the user and password for access.
"EVAC system timing"
to check or modify the date and time of the equipment.
“Impedance Sensivity"
to check or modify tolerance to impedance variations
in loudspeaker lines
Ventana “System Control Config”
