21
15
610.608C
Rev.0
GD-37
6.4.6 Directplay
This mode is special and allows a programme number to be linked to a voice file, without the need to specify an actual
calendar event (day and time of activation).
This programme will appear in the programme list and can only be executed from the programme list manually.
Additionally, you can select the output remote controls that will be activated when this message is triggered. To select an
output, press on the "
OUT
" label of the output to be activated and the corresponding indication will light up. Any combination of
outputs can be activated.
Remember that after modifying parameters that have an associated "
SAVE CHANGES
" button, this button must be pressed
to make the changes effective in the GD-37.
7.4.7 Days
With this programming mode, the selected audio message will be broadcast only on the days selected in "
REPEAT ON
DAYS
", in the time slot starting at "
START TIME
" and ending at "
STOP TIME
", being able to include repetitions of the
message with the interval marked by "
REPEAT PERIOD
" (in multiples of 5 minutes). To set a day of the week, click on the text
of the desired day and the associated indicator light will illuminate.
Additionally, you can select the output remote controls that will be activated when this message is activated. To select an
output, press on the "
OUT
" label of the output you wish to activate and the corresponding indication will light up. Any
combination of outputs can be activated.
Remember that after modifying parameters that have an associated "
SAVE CHANGES
" button, this button must be pressed
to make the changes effective in the GD-37.
7.4.8 Date to date
This mode allows the message to be broadcast between two specific dates, starting on "
START DATE
" and ending on "
END
DATE
", from the time "
START TIME
" to the time "
END TIME
". In this case, the message repetition period (in multiples of 5
minutes) must also be activated by modifying "
REPEAT PERIOD
". If the message repetition period is not set in "
REPEAT
PERIOD
", the programme will not be broadcast.
6.5 REMOTE EVENTS
This screen is used to configure common parameters for all the remote control inputs of the GD-37 (IN1 to IN10 and INH).
Содержание GD-37
Страница 22: ......