Ude GD-37, Инструкция по установке, настройке и эксплуатации

Страница: 16 / 22

21 16 610.608C Rev.0
GD-37
6.5.1 Activation mode
En el menú desplegable correspondiente, seleccione entre Contacto Abierto, “OPEN CONTACT” o Contacto Cerrado,
“CLOSED CONTACT”.
Si se selecciona “ OPEN CONTACT ”, el mensaje empezará a reproducirse después de abrir el contacto correspondiente que
hasta ese momento permanecía cerrado.
Si se selecciona “ CLOSED CONACT ”, el mensaje empezará a reproducirse después de cerrar el contacto correspondiente
que hasta ese momento permanecía abierto.
6.5.2 Priority mode
In the corresponding pull-down menu, select between Geographical " GEOGRAPHICAL ", (the highest priority is IN1 and the
lowest priority is IN10), or by numerical value " NUMERICAL ", (priority 1 is the highest and priority 10 is the lowest).
Parameters must be specified for each of the " REMOTE INPUT " inputs, such as the audio file name " MESSAGE FILE " and
the priority " PRIORITY LEVEL ". It is necessary to specify, at each " INPUT " input, whether the message playback activation
shall be triggered by an edge (" EDGE " or "push-button" type), or by a level change (" LEVEL " or "Switch" type).
If triggered by an edge, the message shall be played only once from beginning to end. If the activation is by level change, the
message shall be played sequentially as long as the level change is maintained.
Additionally, you can select the output remote controls that will be activated when this message is activated. To select an
output, press on the "
OUT " label of the output to be activated and the corresponding indication will light up. Any combination of
outputs can be activated.
Remember that after modifying the parameters that have an associated " SAVE CHANGES " button, this button must be
pressed to make the changes effective in the GD-37.
6.6 CHANGE PASSWORD
This page allows us to change the Password:
To change the password it will be necessary to enter the current password in the " OLD PASSWORD " box (4 numeric digits),
enter the new password in the " NEW PASSWORD " box (4 numeric digits), repeat the new password in the " REPEAT NEW
PASSWORD " box.
Do not forget to press " SAVE PASSWORD " to make the changes effective in the GD-37.
NOTE: Remember that the default password is 1234.