26 | SWIFT K33A ALL IN ONE FUSION SPLICER
americanilsintech.com | 27
The Home screen is displayed as below. The user must choose the correct splice mode,
heater mode and stripper mode specifi c to the fi ber type, shrink sleeve fi ber size to ensure
an accurate splicing result. The basic information of the Swift K33A is displayed on the
initial page. Before splice, make sure the appropriate mode is selected.
SUPPLYING POWER TO THE SWIFT K33A
It is strongly recommended to use the AC adapter (F1-1) and battery (K3360) provided with
package. Using a battery other than provided may cause fumes, fi re, and damage to the
device, personal injury and death.
INSERT & DETACH BATTERY
Insert the battery into the battery groove until it clicks. Remove the Battery by pressing
the battery release button and slide it out.
K33A OPERATION
Battery Status Indicator
Current Splice Mode Display
Current Heater Mode Display
Battery
The unit be powered off before removing the battery to avoid damage. Remove the
battery by releasing lock lever.
Battery
Lock Lever
Battery Pack Status Display
