NINA-W1 series - System integration manual
UBX-17005730 - R15
Revision history
Page 52 of 54
C1 - Public
Revision history
Revision
Date
Name
Comments
R01
23-Mar-2017
fbro
Initial release.
R02
30-Jun-2017
mwej, cmag
Updated the product status to Engineering Sample. Added info about band
pass filter.
Updated best conducted Wi-Fi sensitivity to
-96 dBm (section 1.3.1). Added additional information about software update
(sections 2.3 and 2.4.1). Removed disclosure restriction.
R03
17-Oct-2017
cmag, kgom,
mwej
Modified the software version to 1.0.0 for NINA-W13 series in the table on
page 2. Included information about the open CPU variants – NINA-W101 and
NINA-W102. Updated section 1 and classified the information for NINA-W13
series and NINA-W10 series separately. Updated Software section (section 2)
with more information about NINA-W13 and NINA-W10 software updates.
Updated Block diagrams. Included reference to NINA-W101 and NINA-W102
modules in section 3. Minor changes in section 0.
R04
5-Mar-2018
ajah, mhan,
cmag, kgom
Updated the product status to Initial Production. Modified the product
description (section 1.3) and information about Boot strapping pins (section
1.6.1). Added output power configuration (section 2.7). Updates Approvals
(section 5). Updated Production test (section 6.1) with test and calibration
information. Provided reference to NINA-W10 series data sheet in the Related
documents section.
R05
20-Apr-2018
cmag, kgom
Updated type numbers and u-connectXpress version in the second table on
page 2 with NINA-W13x-00B-01 and 1.0.1 respectively. Updated the Wi-Fi
output power configuration for NINA-W10 series (section 2.7.1.1).
R06
6-Dec-2018
mwej, fbro
Added support for NINA-W15 in many sections. Added support for RMII.
Removed LPO clock support for NINA-W13 and NINA-W15.
R07
18-Dec-2018
fbro, kgom
Modified the product status to Initial Production for NINA-W131-01B-00 and
NINA-W132-01B-00. Updated Bluetooth power (section 2.7).
R08
12-Jul-2019
fbro, flun,
kgom
Updated the product status for NINA_W15x to Initial Production. In section
1.1, removed the footnote related to pending modular approvals. Updated
soldering profile (Table 7). Updated Wi-Fi output power configuration for
NINA-W10 series (section 2.7.1 ). Minor corrections in section 1.1.1.
R09
25-May-2020
Mlju, hekf
Updated Applicable Products section and added NINA-W106 and W156
modules. Revised software sections 2.1 and 2.2. Introduced the design-in of
W1x6 in section 3.3.3.2. Updated ESD Table 6. Added u-connect and s-center
user guide references [7] [8].
R10
15-Jul-2020
flun
Clarified chapter 2.5 with regards to ESP-IDF v3 and ESP-IDF v4:
Added chapter 2.5.5 noting CONFIG_SPI_FLASH_USE_LEGACY_IMPL must
be set to Y if using ESP-IDF 4.0 for NINA-W101/102. and that on NINA-W106,
CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP
and
CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V must be set to Y, and it may
be required to add the
--no-stub
parameter to esptool.py during
programming.
Added ESP IDF 4.0 output power configuration to chapter 2.7.1.
Modified the product status to Prototype for NINA-W106.
Updated glossary.
R11
30-Sep-2020
flun
Added SPI in section 1.7.3. Updated boot strapping pins in section 1.6.1, and
clarified RTS/CTS pins in section 1.7.1.
Clarified software update requirements in section 2.
Updated the Glossary, Document information and Related documents.
