9
Heating Control H1
Chapter 2
| Commissioning
2.1 Mounting
1. Unmount your currently installed radiator thermostat.
2. To do this, turn the mounting ring (A) counterclockwise until the
thermostat head comes off the valve (you may need pliers for this).
Note:
Don‘t worry, water can‘t leak out in the process.
3. Turn the mounting ring (A) of the H1 onto the radiator valve until it
is properly tightened. Do not use a tool for this.
Note:
The H1 is suitable for all commercially available valves with
an M30 x 1.5 connection*).
*) If the H1 does not fit, you will find a list of radiator valve adapters at www.ubisys.de.
Note:
To unmount the H1, please use the „Unmount“ function (Chapter 5.6).
2.2 Initial commissioning (with and without gateway)
Note:
If you wish to use the H1 heating controller as stand-alone solution, you only need to follow steps 4-11.
To be able to use the full range of functions and also control the device via app, you need a Zigbee-
capable gateway, such as the ubisys G1.
This is followed by the commissioning in combination with the ubisys G1 and the ubisys Smart Home App. Be-
fore you start this, you should have commissioned the ubisys G1. If you want to operate the H1 using a gateway
and accompanying app of another manufacturer, please follow the corresponding instructions of that manufac-
turer.
Содержание H1
