30
Heating Control H1
Chapter 5
| More Functions and Information
5.1 Cancel operation/exit menu
If you are in one of the two menus, you can use the button to return to the start page at any time. To do this,
press and hold the button for approx. 2 seconds. The same applies to operations/settings that you want to can-
cel (such as create/change schedule, set date/time, etc.).
5.2 Updates
ubisys regularly provides free software updates for the H1. These may contain new functions or possible error
corrections. For this you need the ubisys gateway G1 or another Zigbee capable gateway.
The H1 has an over-the-air update function, i.e. the device can be supplied with new firmware versions via the
gateway using Zigbee radio technology.
5.3 Calibrate the H1
The H1 is automatically calibrated during initial commissioning. To calibrate the device (again) during operation,
proceed as follows:
Display
Button
Schraubring
Drehrad
Batterie-Schutzfolie
100 mm
55 mm
1. Press and hold the button for 10 seconds to enter the second
menu.
2. By operating the rotary dial you switch between the different menu
items.
0°C
2021.09.30
00:00
3. Turn the rotary knob until the symbol for „Calibrate“ appears in the
display.
4. Press the button again to confirm the menu item.
5. The symbol flashes.
6. Press the button again to confirm.
7. The device is automatically calibrated (motor sounds are heard).
To abort at point 5. turn the dial to the left or right and the operati-
on will be aborted and you will return to the menu mode.
Содержание H1
