Ubisys G1, Инструкции по сборке и пусконаладке

Страница: 19 / 51

19 Gateway G1
Section 3 | Gateway G1 Configuration
4. After filling the information, click the “Save” button (see figure 16).
Figure 15
Figure 16
3.2.2 Time and date
In the “Time and date” section, the current date and time of your system is displayed. This information is impor-
tant when configuring time dependent actions for your Smart Home System (e.g. automatically raise blinds at a
certain time). If possible, date and time should be synchronized with an internet time server (NTP server). This
configuration is set by default. For this, the option “Synchronize date and time automatically” should be enabled
(see figure 17). A permanent internet connection, such as DSL, is required.
Figure 17
If you want to set the system date and time manually, follow these steps:
1. Deactivate the option “Synchronize date and time automatically” by clicking on the check mark (see figure
17).
2. A mask for manual configuration will automatically be displayed (see figure 18). Click the appropriate text
boxes to specify date and time.
3. Click on the “Save” button after finishing the configuration.