Ubisys G1, Инструкции по сборке и пусконаладке, Страница: 44 / 51

44 Gateway G1
Section 3 | Gateway G1 Configuration
Figure 69
5. In the entry field, enter the host name (can also be a DDNS host name) or, optionally, the static, public IP
address of your router or the gateway (see figure 69) and accept by tapping “OK”. If you defined a port
number different from 8888 for port forwarding on public side, enter a colon after the host name, followed
by the port number, e.g. “smarthome.dyndns.org:8889”, if you selected port 8889. “smarthome.dyndns.org”
is an example name here. Instead, use the host name or the static IP address of your router.
Figure 70
6. The recently entered gateway now appears in the list of available gateways. Tap and hold the list for 1 se-
cond (or tap the check mark, if you have used the pencil icon) to end the edit mode.
7. Your Smart Home System can now be reached via app while being on the move.
8. Tap the new entry to establish a connection. If the facility was already known by another (local) address, this
address will be replenished and the additional entry disappears.