26
Chapter 7: VLANs Tab
TOUGHSwitch
™
PoE User Guide
Ubiquiti Networks, Inc.
Chapter 7: VLANs Tab
The
VLANs
tab configures Virtual Local Area Networks
(VLANs) and trunk ports.
The TOUGHSwitch image displays the active LEDs and
connections. See
“Hardware Overview” on page 1
for more information.
Total Throughput
for
TX
and
RX
are also displayed.
Place your mouse over a port to view its
PoE
status,
Speed
setting, duplex mode, and statistics for
TX
and
RX
throughput.
Revert Changes
To cancel your changes, click
Revert
Changes
.
Test Changes
To try the changes without saving them,
click
Test Changes
. To keep the changes, click
Apply
. If
you do not click
Apply
within 180 seconds (the countdown
is displayed), the device times out and resumes its earlier
configuration.
Save Changes
To immediately save your changes, click
Save Changes
.
VLANs
All ports belong to VLAN1, which is enabled as a
management VLAN by default. A port can belong to more
than one VLAN.
Trunk Ports
Trunk mode is enabled by default. Trunk
ports carry both untagged and tagged traffic from
multiple VLANs.
