UBCO 2X2, Руководство пользователя

Страница: 7 / 29

10 11
06 Accessory Lugs
There are 16 accessory lugs built into the frame
to provide solid mounting points for accessories.
Three more lugs are available on the front carrier.
These lugs fit standard M8 bolts and contain a
cavity in the back to house an M8 nut, preventing it
from spinning as the bolt is tightened or loosened.
These lugs are strategically placed on the frame
to provide maximum flexibility facilitating the
attachment of small and large items. Ensure all nuts
are securely tightened and loads are strapped
down before riding the bike.
07 Suspension
The Ubco 2×2 is equipped with both front and
rear suspension for a smooth ride. The front
suspension is 36mm ATF forks with adjustable
rebound damping with 90mm of travel. The rear
suspension is 32mm ATR shocks with adjustable
spring preload and rebound damping with 120mm
of travel.
08 Lithium-Ion Battery
The specially designed 40ah 50V lithium-ion
battery provides a riding range of up to 100km
per charge. This can be more or less depending
on your riding habits and terrain. The long range
battery takes just 6 to 8 hours to charge from
empty, emits no smoke or noise and costs an
average of 88¢ NZD for a full charge.
The battery comes with a wall charger that is
designed to be plugged into a 100-240V AC
50/60 Hz outlet only. Do not attempt to charge the
battery with anything other than the supplied charger.
The battery is interchangeable and can be
removed from the bike simply by unlatching,
unplugging and lifting with care. To find out how to
charge the bike, see Section 04: Riding the 2×2.
09 Kickstands
The Ubco 2×2 is equipped with two side
kickstands for maximum flexibility. The stands are
sprung to allow for easy deployment and stowage.
10 Tyres
The 2.75 x 17 tyres are designed for long life and
ultimate grip. They are suitable for a wide range
of terrain, including tough, hilly, rocky, muddy and
wet environments.
11 Dual Electric Drive Motors
The Ubco 2×2 is dual electric drive, meaning it has
a motor in both the front and back wheels. The
nature of the bike results in no clutch or drivetrain,
so it releases no emissions and is whisper quiet.
This also allows for better handling, especially in
slippery conditions.
The two 1kw air cooled, high efficiency, brushless
motors have great power and traction, allowing you
to tackle difficult terrain. The bike has a top speed
of 45km/h and a max combined torque of 90 Nm.
Modifications
We strongly advise not to remove
any original equipment or modify the
bike any way that would change its
design or operation. The 2×2 has been
designed in a way that makes it safe for
all users; changing this intention could
result in injury both to riders and those
around you.
If you are to adapt the bike for your
needs, use all lugs and carriers
provided and follow safety instructions.