UBCO 2X2, Руководство пользователя

Страница: 17 / 29

30 31
Step 16: Battery
Stand the bike upright or remove it from the stand
or block. Engage the kickstand so the bike can
stand on its own. Lift the seat of the bike.
Lower the battery into the bike with the socket on
the right-hand side of the bike.
Do not drop the
battery into the bike from a height. Ensure the
socket is clean. Plug the bike cable firmly into the
battery socket.
Turn the key to ACC to check the battery charge.
a.
c. d.
BATTERY
Finished strap:
b.
Attach the battery strap:
a.
Slide the round end of the open strap under the
left-hand bar with the Velcro facing up.
b. Holding the clip in place above the left-hand
bar, pull the strap across the battery and slide it
under the right-hand bar.
c. Bring the round end back across the battery and
thread it through the clip, from bottom to top.
d. Secure the Velcro closed so that it lies flat on
top of the battery, keeping the clip close to the
left-hand bar. Ensure battery is tightly secured.
Final Checklist
F
Turn the bike on to check battery level. The
battery level indicator should light up on the
console. There won't be any sound or vibration
to indicate the power is on.
» If the bike doesn't turn on, check the
battery plug is firmly inserted in the socket
on the battery.
F
Ensure wheel nuts are tight (Step 14).
F
Check motor cables are attached and secured.
F
Check the brakes function properly.
F
Check the kickstands function properly.
F
Ensure the seat clips are securely engaged on
the frame.
F
Pump up the tyres according to your cargo.
F
Familiarise yourself with the following
Section 04: Riding the 2×2 and follow the
pre-ride inspection before riding.
If anything goes wrong with assembly, please
contact your service provider or contact Ubco Ltd
via www.ubcobikes.com.
Load Tyre Pressure
RIDER + CARGO FRONT (PSI) REAR (PSI)
75kg 20 20
100kg 20 25
125kg 25 30
150kg 33 33