UAZ HUNTER 315148, Руководство по эксплуатации

Страница: 86 / 136

86
Fig. 9.25. Adjustment of the wheels
steering angle:
1 — steering stop bolt; 2 — lock-nut ;
3 — steering stop
Fig. 9.24. The front axle:
1 — filler plug; 2 — drain plug; 3 — safety valve; 4 — lower pin nut
- unscrew nut 13;
- remove shield 12 with spacer 11;
- using a special wrench, tighten clamping bushing 10 to
remove gap (preliminarily hitting the threaded end of the pin
with a copper hammer);
- by turning the wrench by 10-20°, tighten this bushing to
obtain a preliminary tension along the common axle shaft of
the pins;
- install shield 12 with spacer 11;
- tighten the nut of pin 13 with the torque force of 80-100
N•m (8-10 kgf•m) (see Appendix 2). Warning! Exceeding of
the tightening torque can lead to weakening of the preliminary
tension and failure of the pin unit.